AG-IIR001B Modern&Durable Baby used infant baby cot
Specification
1.Microprocessor based servo controlled temperature system
2.Temperature displayed by LED
3.Alarms functions : Power failure; over temperature; temperature deviation; temperature sensor failure;fan failure;
4.>37°C temperature setting
5.A keypad lock prevent inadvertent changes the setting
6.Humidity is adjustable continuously
7.Heating power displayed on panel
8.A second thermal cut-off function for more safety
9.The infant bed inclination angle is adjustable
10.Trough for pulling and pushing ,which is convenient to add water and wash
11.Fan with low noise and long life-span
12.Temperature deviation and over temperature could be amended in front panel directly
13.Silence/reset button for alarms
14.six operating windows,two sides operating windows can be swiveled
15.Heater is electrically cut-out if air temperature inside incubator exceed 40°C
16.Cupboard for easy storage
Optional parts:
Phototherapy up side unit;
phototherapy from up and down sides;
RS232(485)conncector;
Tray/pole;
Infant bed pulled from side door ;
Infant bed pulled from side and front door;
Double wall hood
Technical data:
1.Power supply : AC 110/220V 60/50Hz
2.Power input : ≤420VA
Operating conditions:
1.Environment temperature: 20°C~30°C
2.Environment relative humidity: 30%~75%RH
3.Environment air velocity of flow: <0.3m/s
4.Humidity accuracy: ≤10%RH
5.Air Temperature control range: 25°C~38°C
6.Temperature fluctuation: +/-0.5°C
7.Uniformity of mattress temperature: ≤0.8°C
8.Warm-up time: ≤45min
9.Internal noise level: ≤55dB
10.Infant bed tilt angle : +10º
11.Mattress size: 65cm(L)×37cm(W)
12.Trough capacity: 1200ml
13.Air filter:0.5um
Transport and storage
Environment Temp:-10°C--+70°C
Environment Relative Humidity: ≤80%
Atmospheric Pressure: 500~1060Hpa
Standard configuration |
Main body(including the transparent hood, control system, infant bed, water trough), |
I.V.pole |
Mattress |
Cabinet |
Castors |